之前的文章《一文講解ajax實現無刷新上傳和下載（代碼詳解）》中，給大家了解了ajax實現無刷新上傳和下載。下面本篇文章給大家了解Linux和MacOS終端大小寫敏感問題，伙伴們來看看吧。

Linux和MacOS終端提示大小寫不敏感

打開終端，并cd到用戶home目錄，輸入：

echo "set completion-ignore-case on" >> .inputrc

關閉再重新打開終端即可

如果你只想快速解決上面的問題，直接看第三部分即可。

inputrc 文件介紹

Bash和其它大多數shell使用Readline庫作為其輸入相關的庫。Readline庫有一些默認的鍵盤映射，除此之外，也可以通過修改inputrc文件來定制鍵盤映射。

inputrc文件時Readline庫的啟動文件，當使用Readline作為輸入庫的程序啟動時，它會自動讀取inputrc配置文件，初始化自定義的鍵盤映射。

inputrc文件的位置由shell的環境變量INPUTRC控制，如果該變量沒有設置，缺省的inputrc文件的路徑是~/.inputrc。

如果該文件~/.inputrc不存在，就會使用系統級（對所有用戶生效）的inputrc文件/etc/inputrc。如果某個用戶需要修改系統默認的 inputrc配置，可以改動~/.inputrc，這樣會覆蓋系統的默認配置。

關于如何編輯inputrc文件的信息，運行info bash，參考bash的info頁的Readline Init File這一節，運行info readline以參考readline自己的info頁。

inputrc 配置

在inputrc文件中，有兩種配置：一種是inputrc變量，一種是鍵盤映射。 注意，在配置該文件時，注釋必須占單獨的一行，否則可能會有問題。

inputrc變量配置

變量配置的語法如下：

set variable value

常見的變量和配置如下：

completion-ignore-case #如果設置為開(on)，在自動補全時不區分大小寫。該配置默認是關。  show-all-if-ambiguous #這個配置該變了自動補全函數的默認行為。如果設置為開(on)，當自動補全的結果有一個以上時，會直接列出這些結果。如果設置為關(off)，就會提示一個beep蜂鳴聲，當再按下tab時才會列出自動補全的結果。默認這項配置為關。  bell-style #Controls what happens when Readline wants to ring the terminal bell. If set to ‘none’, Readline never rings the bell. If set to ‘visible’, Readline uses a visible bell if one is available. If set to ‘a(chǎn)udible’ (the default), Readline attempts to ring the terminal's bell.  bind-tty-special-chars #If set to ‘on’, Readline attempts to bind the control characters treated specially by the kernel's terminal driver to their Readline equivalents.  comment-begin #The string to insert at the beginning of the line when the insert-comment command is executed. The default value is "#". completion-prefix-display-length  #When set to a value greater than zero, common prefixes longer than this value are replaced with an ellipsis when displaying possible completions. #e.g. set completion-prefix-display-length 4  completion-query-items #The number of possible completions that determines when the user is asked whether the list of possibilities should be displayed. If the number of possible completions is greater than this value, Readline will ask the user whether or not he wishes to view them; otherwise, they are simply listed. This variable must be set to an integer value greater than or equal to 0. A negative value means Readline should never ask. The default limit is 100.  convert-meta #If set to ‘on’, Readline will convert characters with the eighth bit set to an ascii key sequence by stripping the eighth bit and prefixing an <ESC> character, converting them to a meta-prefixed key sequence. The default value is ‘on’.  disable-completion #If set to ‘On’, Readline will inhibit word completion. Completion characters will be inserted into the line as if they had been mapped to self-insert. The default is ‘off’.  editing-mode #The editing-mode variable controls which default set of key bindings is used. By default, Readline starts up in Emacs editing mode, where the keystrokes are most similar to Emacs. This variable can be set to either ‘emacs’ or ‘vi’.  echo-control-characters #When set to ‘on’, on operating systems that indicate they support it, readline echoes a character corresponding to a signal generated from the keyboard. The default is ‘on’.  enable-keypad #When set to ‘on’, Readline will try to enable the application keypad when it is called. Some systems need this to enable the arrow keys. The default is ‘off’.  enable-meta-key #When set to ‘on’, Readline will try to enable any meta modifier key the terminal claims to support when it is called. On many terminals, the meta key is used to send eight-bit characters. The default is ‘on’.  expand-tilde #If set to ‘on’, tilde expansion is performed when Readline attempts word completion. The default is ‘off’.  history-preserve-point #If set to ‘on’, the history code attempts to place the point (the current cursor position) at the same location on each history line retrieved with previous-history or next-history. The default is ‘off’.  history-size #Set the maximum number of history entries saved in the history list. If set to zero, the number of entries in the history list is not limited.  horizontal-scroll-mode #This variable can be set to either ‘on’ or ‘off’. Setting it to ‘on’ means that the text of the lines being edited will scroll horizontally on a single screen line when they are longer than the width of the screen, instead of wrapping onto a new screen line. By default, this variable is set to ‘off’.  input-meta #If set to ‘on’, Readline will enable eight-bit input (it will not clear the eighth bit in the characters it reads), regardless of what the terminal claims it can support. The default value is ‘off’. The name meta-flag is a synonym for this variable.  isearch-terminators #The string of characters that should terminate an incremental search without subsequently executing the character as a command. If this variable has not been given a value, the characters <ESC> and C-J will terminate an incremental search.  keymap #Sets Readline's idea of the current keymap for key binding commands. Acceptable keymap names are emacs, emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move, vi-command, and vi-insert. vi is equivalent to vi-command; emacs is equivalent to emacs-standard. The default value is emacs. The value of the editing-mode variable also affects the default keymap.  mark-directories #If set to ‘on’, completed directory names have a slash appended. The default is ‘on’.  mark-modified-lines #This variable, when set to ‘on’, causes Readline to display an asterisk (*) at the start of history lines which have been modified. This variable is ‘off’ by default.  mark-symlinked-directories #If set to ‘on’, completed names which are symbolic links to directories have a slash appended (subject to the value of mark-directories). The default is ‘off’.  match-hidden-files #This variable, when set to ‘on’, causes Readline to match files whose names begin with a ‘.’ (hidden files) when performing filename completion, unless the leading ‘.’ is supplied by the user in the filename to be completed. This variable is ‘on’ by default.  output-meta #If set to ‘on’, Readline will display characters with the eighth bit set directly rather than as a meta-prefixed escape sequence. The default is ‘off’.  page-completions #If set to ‘on’, Readline uses an internal more-like pager to display a screenful of possible completions at a time. This variable is ‘on’ by default.  print-completions-horizontally #If set to ‘on’, Readline will display completions with matches sorted horizontally in alphabetical order, rather than down the screen. The default is ‘off’.  revert-all-at-newline If set to ‘on’, Readline will undo all changes to history lines before returning when accept-line is executed. By default, history lines can be modified and retain individual undo lists across calls to readline. The default is ‘off’.  show-all-if-unmodified #This alters the default behavior of the completion functions in a fashion similar to show-all-if-ambiguous. If set to ‘on’, words which have more than one possible completion without any possible partial completion (the possible completions don't share a common prefix) cause the matches to be listed immediately instead of ringing the bell. The default value is ‘off’.  skip-completed-text #If set to ‘on’, this alters the default completion behavior when inserting a single match into the line. It's only active when performing completion in the middle of a word. If enabled, readline does not insert characters from the completion that match characters after point in the word being completed, so portions of the word following the cursor are not duplicated. For instance, if this is enabled, attempting completion when the cursor is after the ‘e’ in ‘Makefile’ will result in ‘Makefile’ rather than ‘Makefilefile’, assuming there is a single possible completion. The default value is ‘off’.  visible-stats #If set to ‘on’, a character denoting a file's type is appended to the filename when listing possible completions. The default is ‘off’.

鍵盤映射配置

配置inputrc變量的語法如下：

keyname: function-name or macro  #keyname必須是英文，可以是Control-u、Control-k等。并且keyname和冒號之間不能有空格，如果有空格會被認為是keyname的一部分。keyname的寫法多樣，取決于自己的喜好。 #下面是一些鍵盤映射配置的例子：  Control-u: universal-argument C-u is bound to the function universal-argument  Meta-Rubout: backward-kill-word M-DEL is bound to the function backward-kill-word  Control-o: "> output" C-o is bound to run the macro expressed on the right hand side (that is, to insert the text ‘> output’ into the line)  Control-j: menu-complete C-j is bound to cycle through the available tab completions.  Control-k: menu-complete-backward C-k is bound to cycle backwards through the available tab completions.  "t": menu-complete Use tab to cycle through all the possible completions.  "C-p": history-search-backward Map control-p to allow search for completions to the current line from your history. e.g. type “git” and then hit control-p to cycle through all the recent git commands.  "ep": history-search-backward Map escape-p to allow search for completions to the current line from your history. e.g. type “git” and then hit escape-p to cycle through all the recent git commands.  "e[A": history-search-backward Map Up arrow to allow search for completions to the current line from your history. e.g. type “git” and then hit UP to cycle through all the recent git commands.  "e[B": history-search-forward Map Down arrow to allow search for completions to the current line from your history. e.g. type “git” and then hit DOWN to cycle back through all the recent git commands.  "C-d": kill-whole-line Map control-d to kill the whole line.

設置MacOS下自動補全不區分大小寫

通過上面的介紹，解決這個問題應該是綽綽有余了。打開用戶主目錄下的文件~/.inputrc（如果沒有的話，就新建該文件），在其中添加如下配置：

# 設置自動補全不區分大小寫 set completion-ignore-case on # 當有一個以上自動補全結果時，直接列出，不用beep提示 set show-all-if-ambiguous on

保存該文件，然后，重啟命令行，就會發現自動補全不區分大小寫已經生效了。 網上好多結果中，還需要多加一個下面的配置：

TAB: menu-complete

這個配置的目的是，在列出自動補全的結果之后，再按一次tab鍵，就會自動在自動補全列表中選擇，而不是一直展示自動補全列表。

推薦學習：Mac OS入門教程、Linux視頻教程